Does the petainerKeg™ fit my standard tapping equipment? Yes, the
petainerKeg™ can be tapped to standard and Micromatic-compatible coupling
systems (A-, S- and D- Type), no conversion and additional investment is
necessary.
Can the petainerKeg™ be filled on my existing filling
line? Yes, for filling on steel keg lines Petainer offer two options a.) the
petainerKeg™ USD version, or b.) the adapter keg. For both options the racker
needs to be equipped with a one-way-keg filling operation mode and format parts
– please contact your machine supplier for further details. Nevertheless
the most economical option is using the petainerKeg Classic version with a
dedicated one-way-keg filler.
Is petainerKeg™ recyclable? Yes, petainerKeg™ is
fully and easily recyclable in a standard plastic recycling stream.
Can petainerKeg™ be used in hot areas? Yes, the specified
and continuously tested burst pressure of the keg is 7bar. The CO2 content
should not exceed 5.5 g/l.
Is petainerKeg™ safe? The petainerKeg™ is equipped with a
pressure with a pressure release function which automatically depressurises the
system at decoupling of the empty belly. The petainerKeg is also protected by
an outer packaging, either carton or Polypropylene.
What are the risks of a petainerKeg™ bursting? When filled, handled
and transported correctly, petainerKegs are completely safe. For your security
the following should be observed: Avoid sharp objects. Maintain the
correct filling pressure (Max 3bar). Always handle with care.Burst
pressure of a petainerKeg™ is 7bar.
Can I fill a petainerKeg™ on my current keg line? 20 and 30 litre keg
formats have been designed for use on some existing, suitably modified metal
keg filling lines.
How easy is it to dispense from a petainerKeg™ in a bar? All petainerKegs carry MICROMATIC compatible
fittings. Familiar to retail outlets world-wide, they require very little
additional training. Whilst fittings are MicroMatic compatible, we cannot
guarantee operation with alternative systems.
